9 Useful Tips to Remember When Sewing a Chiffon Fabric
  • By
  • Sewing Tips, Sewing Fabrics
  • Posted February 04, 2016
9 Useful Tips to Remember When Sewing a Chiffon Fabric

9 Useful Tips When Sewing a Chiffon Fabric

9 Useful Tips When Sewing a Chiffon Fabric

Chiffon is a lightweight, sheer fabric made from cotton, silk or synthetic fibers. It’s used frequently in evening wear and lingerie, but also works well for blouses or other light, airy garments. Chiffon can be quite slippery, which makes it tricky to work with. It’s not recommended for your first foray into machine sewing, but if you’ve got the basics down, it’s worth giving it a shot.

Read on to uncover a few sewing chiffon tips to make the process easier!

Use Fabric Weights

Fabric Weights

By using fabric weights, you are able to keep the fabric smooth and taut for better cutting. Use new, fine-tip straight pins to prevent snags and holes in the fabric. If you can, baste your pieces together rather than using pins at all.

Cover Cutting Surface Using Tissue Paper

Tissue Paper

Lay your fabric on top of the tissue paper and your pattern pieces on top of the fabric. Cut through the tissue paper. This will keep your fabric from shifting around as you try to cut. After cutting the fabric, let it rest for about 30 minutes before sewing. You can also try using a liquid stabilizer to help stabilize the fabric throughout the construction process.

Cut Through One Layer of Fabric at a Time

One Layer of Fabric at a Time

If you have a pattern piece that needs to be cut on the fold, make a double of the pattern piece and tape it together so that you can cut the piece out without folding the fabric. Follow this and you’ll surely see better sewing results.

Use Tailor Tacks Instead of Cutting Notches

Tailor Tacks

A tailor tack is a doubled length of thread run through the fabric at notches and darts. Use a contrasting color of cotton basting thread.

Always Use a New or Sharp Needle

Sharp Needles

Perhaps one of the most important sewing chiffon tips is to always begin the project with a new, sharp needle in your machine, and, if possible, a straight stitch needle plate. The straight stitch needle plate will prevent the chiffon from getting sucked down into the needle hole.

Beware of Stretching


Among all fabrics, Chiffon is always prone to stretching. So be careful as you feed the fabric through the machine. If it does get stretched out, you can usually steam iron it back to its original size.

Go For French Seams

 French Seams

Not only do they look pretty, neatly hiding the raw edges of your fabric, but they will help stabilize the garment and prevent it from warping. Although chiffon can be difficult to work with, the good news is that the drapery nature of the fabric will hide minor imperfections. Take your time, sew slowly and you’ll be pleased with the end results. Remember: French seams are a great option for finishing seams on a chiffon garment.

Use a Fairly Short Stitch Length

Fairly Short Stitch Length

Whether you’re a beginner or not, you should always go for a fairly short stitch length. Somewhere between 12 to 20 stitches per inch. Of course, always test first to adjust for your fabric and machine.

Don’t Go for Back Tacking

Back Tacking

As much as possible, it’s best that you avoid back tacking. Instead, make sure you leave enough thread at the beginning and end of your seam to hand knot.


Alvin is a fashion and lifestyle writer who has recently earned interest in sewing his own clothes. Writing for Sewing Ideas gives him another avenue to express his experiences and learning in his sewing journey.

Latest Posts


Subscribe to our newsletter for good news, sent out every week.